IMPORTANT INFORMATION (Please read this)
----------------------------------------

For more up-to-date information on configuring BSP,
please refer to the BSP.chm file under the help directory,
or visit http://www.bspquakeeditor.com/doc.php .

----------------------------------------

Before you run BSP for the first time,
you should check the following information:

BSP assumes each program is installed in a
specific directory:

BSP - C:\BSP
Quake - C:\Quake
Hexen2 - C:\Hexen II
Quake2 - C:\Quake2

If your setup differs from this, you need to do the
following steps:

1 - edit the game.cfg file under whatever game you are
setting up (ie. c:\bsp\quake2\game.cfg) and change
the drive\directory references to match your setup.

2 - edit the batch files under c:\bsp\<whatevergame>\bats
to match your correct drive if necessary.

Default texture wads are assumed for Quake and
Hexen2 - these are quake101.wad and hex2full.wad.
If you don't have these wads, you need to edit the
game.ini file for those games to match whatever
wad you are using.
-----------------------------------------------------------

DeadMeat (aka Rodney Burns)
10/31/98
updated 7/8/07